Abstand Menü

Accessories for LINITHERM insulation systems


Airtight seal

LINITHERM L+D foil NSK
insulating material, roof insulation, rafter insulation, isolation, thermal insulation PP-vapour barrier and airtightness membrane for roof, ceiling and wall constructions. Polypropylene nonwoven, aluminized polypropylene, beige-silver, fire class E, Sd-Value 40 m -10/+5, temperature resistance -40° C to +80° C
lengthwise overlap both-sided with 40 mm width acrylate-adhesive tape

Width Length Size Package Unit of quantity
m m Roll m² content Unit
1.5 50 75 24 rolls

LINITHERM LiFo Pro
insulating material, roof insulation, rafter insulation, isolation, thermal insulation PP-vapour barrier and airtightness membrane for roof, ceiling and wall constructions (especially for constructions where a dehydration inward is wished), Polypropylene nonwoven with integrated layer, tabacco, fire class E, Sd-Value 5 m ±2, temperature resistance -40° C to +80° C

Width Length Size Palett Unit of quantity
m m Roll m² content Unit
1.5 50 75 24 rolls

LINITHERM L+D adhesive tape
insulating material, roof insulation, rafter insulation, isolation, thermal insulation

Width Size Package Unit of quantity
mm Roll m content Unit
60 25 10 rolls m

LINITHERM Dichtfix
insulating material, roof insulation, rafter insulation, isolation, thermal insulation LINITHERM Dichtfix is a high performance adhesive binder, which permanently glues vapour barriers and vapour brakes with hard surfaces - without using a pressure lath

  Size Package Unit of quantity
    content Unit
  310 ml 20 cartouches Pieces

LINITHERM sealing apron
insulating material, roof insulation, rafter insulation, isolation, thermal insulation Tear-resistant, elastic polymer foil, with mineral fleece on both sides,
incl. compriband 3 x 15 mm

Width Size Package Unit of quantity
mm Roll m content Unit
200 10 5 rolls m
400 10 5 rolls m
600 10 5 rolls m

LINITHERM Compriband
insulating material, roof insulation, rafter insulation, isolation, thermal insulation For sealing the gap between masonry crown and insulation (compress to about 30% when installed); impregnated, and one side self-adhesive

Original thickness x for joints pre-compressed Length Content Unit of quantity
Width mm up to delivery format Roll m m Unit
20 x 15 3-7 4 x 15 7.5 150.0 m
40 x 20 7-12 8 x 20 4.3 64.5 m
60 x 30 10-18 12 x 30 5.0 50.0 m


Sealing

LINITHERM 1K PU spray foam
insulating material, roof insulation, rafter insulation, isolation, thermal insulation LINITHERM filling foam, incl. recycling fee

Can content Package content Unit of quantity
ml Cans Unit
600 12 Pieces

LINITHERM 1K PU pistol foam
insulating material, roof insulation, rafter insulation, isolation, thermal insulation LINITHERM filling and sealing foam, incl. recycling fee

Can content Package content Unit of quantity
ml Cans Unit
750 12 Pieces

Jointing tape for LINITHERM PAL N+F
insulating material, roof insulation, rafter insulation, isolation, thermal insulation Application recommendation: for sloping roof insulation system LINITHERM PAL N+F
for sealing the short sides
Quantity required: per element 1 piece

Width Length Size Unit of quantity
mm mm bundle Unit
40 1060 5 Pieces

Adhesive tape BK
insulating material, roof insulation, rafter insulation, isolation, thermal insulation Application recommendation: for sloping roof insulation system LINITHERM PAL N+F & PAL polymer
Butyl rubber, 1 mm thick, for sealing coves, ridges, etc.

Width Size Unit of quantity
mm Roll m Unit
200 10 m
300 10 m

'T' adhesive tape
insulating material, roof insulation, rafter insulation, isolation, thermal insulation Application recommendation: for sloping roof insulation system LINITHERM PAL 2U, PAL 2U Plus, PGV T, PGV T Kombi, PAL SIL T, PAL 2UM, PAL HT and PGV HT
Polyacrylate adhesive tape

Width Size Unit of quantity
mm Roll m Unit
200 25 m

LINITHERM U Plus Membrane
insulating material, roof insulation, rafter insulation, isolation, thermal insulation Application recommendation: for sloping roof insulation system LINITHERM PAL 2
diffusible membrane with TPU coating on both sides for warm welding and solvent welding, class E
temperature resistance -40°C to + 80°C
Resistance against water penetration W1

Width Length Size Palett Unit of quantity
m m Roll m² content Unit
1.5 50 75 20 rolls

LINITHERM UD-cover stripe
insulating material, roof insulation, rafter insulation, isolation, thermal insulation Application recommendation: for sloping roof insulation system LINITHERM PAL 2U Plus
diffusible filler stripes with TPU coating for warm welding and solvent welding on premium diffusion membrane, class E
temperature resistance -40°C to + 80°C, resistance against water penetration W1

Width Size Package Unit of quantity
mm Roll m content Unit
300 25 5 rolls m

LINITHERM Solvent welding agent
insulating material, roof insulation, rafter insulation, isolation, thermal insulation Application recommendation: for sloping roof insulation system LINITHERM PAL 2U Plus and U Plus Membrane / UD- cover stripe
Solvent welding agent (THF) for welding the LINITHERM UD-cover stripe with the LINITHERM premium diffusion membrane.
The solvent welding agent is applied by a bottle with brush.
Consumption: approx. 5-10 g/m.
Process only in case of dry underground an at temperatures above 5 °C.

Can content Package content Unit of quantity
Liter Cans Unit
1.25 6 Pieces

LINITHERM Bottle with brush
insulating material, roof insulation, rafter insulation, isolation, thermal insulation for application of the LINITHERM solvent welding agent with brush

Unit of quantity
Unit
Pieces


Attachment

LINIFIX Special screws
insulating material, roof insulation, rafter insulation, isolation, thermal insulation With certificate, for mounting the counter-battens (40 x 60 or 40 x 80 mm) and the LINITHERM PUR/PIR insulating elements continuously at an angle of 67°
Quantity required: approx. 1.5 - 2.5 pieces per m²

Structural height 1 Ø x Length Package Unit of quantity
mm mm content Unit
Insulation 50 mm 8 x 180 50 pieces Pieces
Insulation 80 mm 8 x 200 50 pieces Pieces
Insulation 80/100 + boarding 19 mm 8 x 225 50 pieces Pieces
Insulation 120 + boarding 19 mm 8 x 250 50 pieces Pieces
Insulation 140 + boarding 19 mm 8 x 275 50 pieces Pieces
Insulation 160 + boarding 19 mm 8 x 300 50 pieces Pieces
Insulation 180 + boarding 19 mm 8 x 325 50 pieces Pieces
Insulation 200 + boarding 19 mm 8 x 350 50 pieces Pieces
Insulation 220 + boarding 19 mm 8 x 375 50 pieces Pieces
Insulation 240 + boarding 19 mm 8 x 400 50 pieces Pieces

1 Rafter spacing ≤ 0.75 m; snow load 0.65 kN/m²; weight of covering 0.55 kN/m². Every package includes 1 free screw template per delivery.

LINIFIX Dual-thread screws
insulating material, roof insulation, rafter insulation, isolation, thermal insulation Application recommendation: for sloping roof insulation system LINITHERM PAL 2UM, PAL HT and PGV HT
With certificate, for mounting the counter-battens (40 x 60 or 40 x 80 mm) and the LINITHERM PUR/PIR insulating elements
Quantity required: approx. 3 pieces per m²

Structural height 2 Ø x Length Package Unit of quantity
mm mm content Unit
Insulation 80 mm 7.5 x 210 50 pieces Pieces
Insulation 100 mm 7.5 x 230 50 pieces Pieces
Insulation 120 mm 7.5 x 250 50 pieces Pieces
Insulation 140 mm 7.5 x 270 50 pieces Pieces
Insulation 160 mm 7.5 x 300 50 pieces Pieces
Insulation 180 mm 7.5 x 330 50 pieces Pieces
Insulation 200 mm 7.5 x 360 50 pieces Pieces
Insulation 220 mm 7.5 x 400 50 pieces Pieces

2 Lenght of the screws by installation on 19 mm boarding. Note the special statics for PAL 2UM and PAL HT elements with soundproofing panel.

LINIFIX IngBau screws
insulating material, roof insulation, rafter insulation, isolation, thermal insulation Application recommendation: for sloping roof insulation system LINITHERM PAL OSB
Quantity required: approx. 5 pieces per m²

Structural height 3 Ø x Length Package Unit of quantity
mm mm content Unit
102 / 122 8 x 220 50 pieces Pieces
142 8 x 240 50 pieces Pieces
162 8 x 260 50 pieces Pieces
182 8 x 280 50 pieces Pieces
8 x 300 50 pieces Pieces
8 x 320 50 pieces Pieces

3 Lenght of the screws by installation on 24 mm boarding

LITEC Eaves board
insulating material, roof insulation, rafter insulation, isolation, thermal insulation Insulation core: Consists of multiple bonded LINIREC building panels
Thermal conductance λ = 0.096 W/(mK)

Please note: With insulation thicknesses of more than 100 mm, the height is doubled up using 20 mm thick boards

Thickness Width Length Unit of quantity
mm mm mm Unit
20 60 2440 m
100 60 2440 m

Nail sealing tape
insulating material, roof insulation, rafter insulation, isolation, thermal insulation

Thickness Width Size Package Unit of quantity
mm mm Roll m content Unit
3 60 30 10 rolls m


Miscellaneous

LINIREC WDU-profile for manufacturing the waterproof sub-roof
insulating material, roof insulation, rafter insulation, isolation, thermal insulation 80 x 20 mm, long sides bevelled and with 3 holes, for waterproof sub-roof below the sealing

Thickness Width Length Unit of quantity
mm mm mm Unit
20 80 2440 m

Bag for returning PUR/PIR waste
insulating material, roof insulation, rafter insulation, isolation, thermal insulation only for LINITHERM PUR/PIR scrap, sorted
incl. recycling fee
at least 3 bags in connection with a new delivery of LINITHERM

Size Unit of quantity
Unit
PUR bag for returning waste 1000 liters Pieces
PUR waste redemption properly and sorted packed on a pallet or in a bag


Accessories - Additional insulation under the rafters

LINIFIX Screws Troko for PAL GK
insulating material, roof insulation, rafter insulation, isolation, thermal insulation Quantity required: approx. 8 pieces per m²

Thickness mm Ø x Length Package Unit of quantity
element mm content Unit
39.5-49.5 5.1 x 90 250 pieces Package
69.5 5.1 x 110 250 pieces Package
89.5 5.1 x 130 250 pieces Package
109.5 5.1 x 160 250 pieces Package

LINIFIX Adjustment Screws for PAL GKL with integrated battens
insulating material, roof insulation, rafter insulation, isolation, thermal insulation Penetration depth into the rafter: ≥ 40 mm depending on the evenness of the rafters
Quantity required: approx. 5 pieces per m²

Length Package Unit of quantity
mm content Unit
120 100 Pieces Package
140 100 Pieces Package
160 100 Pieces Package


Accessories - Insulation for outside walls

LINIFIX frame screw
insulating material, roof insulation, rafter insulation, isolation, thermal insulation Penetration depth: 30 - 60 mm depending on the masonry
Quantity required: approx. 2 pieces per m²

Ø x Length Package Unit of quantity
mm content Unit
7.5 x 72 100 pieces Package
7.5 x 82 100 pieces Package
7.5 x 92 100 pieces Package
7.5 x 102 100 pieces Package
7.5 x 122 100 pieces Package

Glue
insulating material, roof insulation, rafter insulation, isolation, thermal insulation universally applicable for interior use, very good adherence
Quantity required: approx. 3.5 kg per m²

Size Unit of quantity
Contents kg Unit
20 bag


Accessories - LINITHERM PGF

Rabbet glue
insulating material, roof insulation, rafter insulation, isolation, thermal insulation Quantity required: approx. 50 g/m²

Size Unit of quantity
Content Unit
Bottle 0.8 kg Pieces

Screws
insulating material, roof insulation, rafter insulation, isolation, thermal insulation Quantity required: 13 pieces per m²

Package Unit of quantity
content Unit
500 Pieces Package


Accessories - Insulation of attic floors LINITHERM P OSB

Wood glue
insulating material, roof insulation, rafter insulation, isolation, thermal insulation Quantity required: approx. 40 g/m²

Size Unit of quantity
content Unit
Bottle 0.55 kg Pieces
Bucket 10.0 kg Pieces


Accessories - Insulation of cellar ceilings

Accessories LINITHERM PAL KD
insulating material, roof insulation, rafter insulation, isolation, thermal insulation for mounting the cellar ceiling insulation LINITHERM PAL KD

Quantity required Size Content Unit
Adhesive tape PP-adhesive tape 2.5 m/m² 50 mm Roll 50 m m
LINIFIX
Fixing
claws
2-sided 25 mm 2 Pcs./Element Package 100 Pieces Package
Other attachment variants on request.

Accessories LINITHERM PAL KD white / LINITHERM PAL KD Top
insulating material, roof insulation, rafter insulation, isolation, thermal insulation for mounting the cellar ceiling insulation LINITHERM PAL KD white and LINITHERM PAL KD Top

Measurement Length Quantity required Size Unit
mm mm Content
L-Wall
Connection
Bead
PVC
grey-white
30/30 2400 m
H-Joint Bead PVC
grey-white
25/60 2400
1140*
540**
2.5 m for
PAL KD white;
1.4 m for
PAL KD Top
10
Pcs./Bundle
m
LINIFIX
Fixing
clamps
galv. 15 mm for
thickness 40/43 mm,
20 mm for
other thicknesses
2 Pcs./Element for
PAL KD white;
5 Pcs./Element for
PAL KD Top
100
Pcs./Bundle
Pieces
Other attachment variants on request.

* for LINITHERM PAL KD Top (cross joint)
** for LINITHERM PAL KD white (cross joint)


Accessories - Ceiling insulation system

Accessories LINITHERM PAL S / LINITHERM PAL S Dekor
for mounting the ceiling insulation LINITHERM PAL S / LINITHERM PAL S Dekor

Measurement Length Unit
mm mm
L-Wall Connection Bead PVC grey-white 30/30 6000 m

Accessories LINITHERM PAL S / LINITHERM PAL S Dekor
insulating material, roof insulation, rafter insulation, isolation, thermal insulation
insulating material, roof insulation, rafter insulation, isolation, thermal insulation
for mounting the ceiling insulation LINITHERM PAL S / LINITHERM PAL S Dekor

Measurement Length Quantity required Size Unit
mm mm Content
H-Joint
Bead
PVC
grey-white
25/60 6000
1140*
1.15 m 10
Pcs./Bundle
m
LINIFIX
metal band-
fasteners
galv.
twisted
140 mm for
thickness 40/60 mm,
170 mm for
thickness 80/100 mm
1-1.5 Pcs. Pieces
LINIFIX
Fixing
clamps
galv. 15 mm for
thickness 40 mm,
20 mm for
other thicknesses
3 Pcs. 100
Pcs./Package
Pieces
Other attachment variants on request.

* for cross joint