Flat roof board
Floor insulation with LINITHERM PAL

Abstand Menü

LINITHERM PAL

Economical and lasting thermal insulation for flat roofs, terrace roofs, and green roofs

Reliable insulation ...
  • Maximum insulation with minimum thickness
  • Pressure resistant, durable, and permanently temperature resistant
  • Impervious to moisture, dimensionally accurate & stable, and non-ageing
  • Does not rot

... in perfect professional quality ...
  • Light weight and manageable
  • Fast installation
  • Many other possible uses, e.g. for green roof or roof terrace

... for PUR(E) energy saving
  • Protection from heat in summer
  • Thermal protection in winter
  • Insulating core made of PUR/PIR rigid foam (TCL 022)
  • Maximum insulation with minimum panel thickness
  • Positive building biology: PUR/PIR rigid foam is free of CFC, HCFC, formaldehyde, and fibres
  • Positive life-cycle assessment

Insulation for flat roofs - LINITHERM PAL
Insulation core: PIR rigid foam acc. to DIN EN 13165, class E, aluminium foil on both sides
Edge joints: Thickness 20 - 40 mm: blunt cut on all sides; Thickness 50 - 100 mm and 200 mm: blunt cut on all sides or with rabbet edges; Thickness 120 - 240 mm: rabbet edges on all sides
Coverage: 1200 x 600 mm (for calculation) (coverage is 2 cm less with rabbet edges)
Thickness mm
total
Package contents
Quantity / m²
Pallet contents
Quantity / m²
TCL
PUR/PIR
U-value 1
[W/(m²K)]
20 25 18.00 250 180.0 022 0.95
30 16 11.52 160 115.2 022 0.67
40 12 8.64 120 86.4 022 0.51
50 10 7.20 100 72.0 022 0.41
60 8 5.76 80 57.6 022 0.35
70 7 5.04 70 50.4 022 0.30
80 6 4.32 60 43.2 022 0.27
100 5 3.60 50 36.0 022 0.21
120 4 2.88 40 28.8 022 0.18
140 3 2.16 30 21.6 022 0.15
160 3 2.16 30 21.6 022 0.14
180* 2 1.44 28 20.2 022 0.12
200* 2 1.44 24 17.3 022 0.11
220* 2 1.44 20 14.4 022 0.10
240* 2 1.44 20 14.4 022 0.09
Other thicknesses on request. Delivery only whole packages. Surcharge for rabbet edges.
* Possibly with longer delivery times.
1 U-value, taking the thermal transfer resistance Rsi = 0.1 [m²K/W] and Rse = 0.04 [m²K/W] into account. Object-specific features acc. to DIN EN ISO 6946 are not taken into account.